- Contact Person : Ms. Kung Wendy
- Company Name : Zhuhai Jinzhan Electronic Co., Ltd.
- Tel : 86-0756-3860858
- Fax : 86-0756-8183841
- Address : Guangdong,ZHUHAI,5/F, Building 1, No.45 Ganger Road , Xiawan, Gongbei
- Country/Region : China
- Zip : 519000
anti-theft security alarm display stand for cellphone with charging
It is the most innovative security alarm display system.
1) Prevent your displaying electronics from stealing2) It's convenient for the customers to see mobile phone,camera,laptop,MP4 in the exclusive shops, etc.3) With the connection of the electronics to the display shelf, security display holder canrealized immediately while removed.
4)Charging and anti-theft alarm for mobile phone share one line
PERFECT Alarm Function
The security alarm display holder will alarm when it happens by any way of the follow: 1) Circuit break resistance 2) Short circuit resistance 3) Other circuit-replacing resistance 4) Prying and cutting resistance 5) Remove the sensor 6) Cut the spring wire 7) Put out the connector 8) Put out power connector- alarm(above 5 minutes or more long,according to customers' requirement)
9) When remove or pry the stand on the bottom, the anti-theft function also can be available.
Product Installation
1)Fix the holder on the the exhibition counter with the special screws. 2)Tear off the adhesive tap,and then paste the exhibitions.
Alarm solution when alarm,the green indicator light will turn red immediately.Use the remote control to send signal to the host, within 5mm, press “lock”, and the host indicator light turn green.
Product use1. Product installation Remove the adhesive tap, fix on the exhibition counter
2. The phone installationRemove the adhesive tap, paste the phone, and use the phone special screws to fix the phone. Finally paste the small touch.
3. Alarm indicator Use the remote control to send signal to the host, within 5mm, press “lock”, and the host indicator light turn green.
the alarm indicator.
1. Alarm solution When alarm, use remote control to send signal to host, press “unlock”.
2. Alarm test Using remote control (THIS should be purchased separately,EXW6.50 PER UNIT)to send signal to host, press “lock” ,and the host indicator light turn green, then press “test” to alarm test. Press “unlock” to finish alarm test.
Product specification/ Performance parameters 1.Holder height 115mm, base diameter 100mm &60mm 2.Support bar Oval, up diameter 45mm, down diameter 28mm Site(Length/Width/High)100*60*115mm 3. Sound instructions higher than 90 decibels, ring five seconds, or long ring. 4.Standard communication interfaceRJ45
5.Alarm volume>100dB. 6.Sensor module also can be equipped with the human body if necessary.
Delivery time: We have a certain quantity of goods in stock available, Delivery will be arranged within 5 work days, after order confirmation. If it is a large quantity, delivery will be arranged within 7-25 days, after confirmation.
( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v10/363979322_1/anti_theft_security_alarm_display_stand_for.jpg' , 'http://i00.i.aliimg.com/photo/v10/363979322_2/anti_theft_security_alarm_display_stand_for.jpg' , 'http://i00.i.aliimg.com/photo/v10/363979322_3/anti_theft_security_alarm_display_stand_for.jpg' , 'http://i00.i.aliimg.com/photo/v10/363979322_4/anti_theft_security_alarm_display_stand_for.jpg' , 'http://i00.i.aliimg.com/photo/v10/363979322_5/anti_theft_security_alarm_display_stand_for.jpg' , 'http://i00.i.aliimg.com/photo/v10/363979322_6/anti_theft_security_alarm_display_stand_for.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); anti-theft security alarm display stand for cellphone with charging